Electronics Study Trainer (320-00)

Description

This trainer allows the practical study of a wide range of electronics subjects, including DC and AC circuits, electrical networks, semiconductors, logic gates and fault-finding techniques.

The unique design of the trainer includes a heavy-duty casing with transparent protective cover. When in use, the cover folds back to provide an angled support for the unit. With the cover closed, trainers become stackable for easy storage.

A range of optional experiment cards may be plugged into the trainer to address further subject areas, including electronic systems, transistor amplifiers, linear and digital systems, telecommunications, and microprocessors.

Faults can also be inserted into the experiment cards via the Motherboard, enabling students to investigate electronic faultfinding techniques.

The trainer is supplied with a comprehensive set of carrier-mounted components and a digital curriculum disc providing a comprehensive course of electronics study.

 The trainer includes the following devices and features:

• Patching area for use with component set.
• Connection system for optional plug-in experiment cards.
• On-board signal generator providing square wave and sine wave signal sources.
• 8 logic switches and 2 pushbutton switches for use as control inputs.
• Zero insertion force socket to accommodate dual-in-line integrated circuits.
• Buzzer, white and red LEDs, and headphone.
• Two OR gates, AND gate and inverter.
• Transistor switch and relay.
• 8 logic monitor LEDs for displaying logic outputs.
• 2 red and 2 green LED monitors for traffic light simulation activities.
• 2 seven-segment displays with decoder/drivers.
• Connection panel providing 2mm and 4mm sockets, test pins for oscilloscope probes and connector for powering prototyping boards.
• Full short circuit/overload protection.
• Easy-to-use switched fault facility for fault-finding activities on the trainer and experiment cards.
• Connecting leads, shorting links and power supply adapter.
• Amplifier and Loudspeaker.

 Included in Component Set:

• A total of 28 components mounted on robust carriers and 2 ICs
• Switches (toggle, microswitch)
• Lamp
• Resistors (47R, 100R, 1K, 4.7K,10K, 47K, 100K, 220K, 470K)
• Capacitors (470 nF, 1 µF, 10 µF, 100 µF)
• Inductor (100 mH)
• Sensors (thermistor, phototransistor, microphone)
• Diodes (1N4001, 1N4148)
• Potentiometer (10K)
• Integrated circuits (555 timer, PIC microcontroller)

 Items Included:

• Study Trainer
• Component Set
• Digital Curriculum DVD
• Connection Lead Set
• Storage Case

 Other Items Required:

• Experiment Cards from the 320 Series (Optional)
• Some tasks will require a Dual Trace Oscilloscope (OSC1 or similar) and one or more Multimeters (DM1 or similar)
• Optionally a Virtual Instrumentation Unit (300-03 or similar) may be used.

 General Information:

• Power Requirements: 110 – 240V, 50-60Hz
• Packed Volume: Approx. 0.024 m3
• Packed Weight: Approx. 4 kg