Solar hydrogen technology demonstration system Exhibition Set D201
|
|
|
PLANB_FULLICONS-ONE
PLANB_FULLICONS-TWO
PLANB_FULLICONS-THREE
PLANB_FULLICONS-FOUR
PLANB_FULLICONS-FIVE
? Ask a question
Description
Solar hydrogen technology demonstration system, designed for extended operation, consisting of PEM electrolyser, water tanks and PEM fuel cell. Accessories included: solar module, fan as electric load, cables and textbook.
Perfect for trade fairs, exhibitions or conventions, the H-TEC premium Exhibition Set lets you make state-of-the-art presentations featuring fuel cells and hydrogen technology. This model was designed specifically for extended operation. Its striking appearance immediately draws visitors in. A solar module provides electricity to run the model’s PEM electrolyser. Viewers can watch the reactions taking place inside the transparent cells, observe the gases being created, and marvel at how the energy is stored – in elegant columns of water encased in acrylic glass.
The stored gas is then used to power a fuel cell, which converts the two gases back into water, generating heat and electricity, which in turn powers an electric load. Altogether, this model gives a fascinating self-contained show.
| Product name: | Exhibition Set |
| Item no: | D201 |
| SOLAR MODULE: | |
| H x W x D: | 70 x 150 x 280 mm |
| Weight: | 500 g |
| Number of single modules: | 3 |
| Active solar area: | approx. 180 cm² |
| Open-circuit voltage: | approx. 2000 mV DC |
| Operating current: | approx. 1050 mA* |
| EXHIBITION SET: | |
| H x W x D: | 710 x 800 x 300 mm |
| Weight: | 4800 g |
| ELECTROLYSER: | |
| Number of cells: | 1 |
| Active area per cell: | 60 x 60 mm |
| Operating medium: | distilled water, σ < 2 μS/cm |
| Permissible operating voltage: | 0 - 2000 mV DC |
| Permissible operating current: | 0 - 5700 mA |
| Rated power consumption: | approx. 10000 mW |
| H2 gas production at rated power output: | approx. 43 cm³/min |
| O2 gas production at rated power output: | approx. 21.5 cm³/min |
| GAS STORAGE TANK: | |
| H2O fill volume, H2-side: | approx. 500 ml |
| H2O fill volume, O2-side: | approx. 500 ml |
| H2 gas storage volume: | – |
| O2 gas storage volume: | – |
| FUEL CELL: | |
| Number of cells: | 1 |
| Active area per cell: | 40 x 40 mm |
| Operating media: | hydrogen and oxygen |
| Open-circuit voltage: | approx. 1000 mV DC |
| Short-circuit current: | approx. 3300 mA |
| Rated power output: | approx. 1200 mW |
| H2 gas consumption at rated power: | approx. 23 cm³/min |
| O2 gas consumption at rated power: | approx. 11.5 cm³/min |
| FAN: | |
| H x W x D: | 130 x 40 x 60 mm*** |
| Weight: | 90 g |
| Permissible operating voltage: | 0 - 1000 mV DC |
| Permissible operating current: | 0 - 20 mA |
| Rated power consumption: | approx. 10 mW |
*standard test conditions (STC)
***vertical rotor position
